The eraser or alcohol abrasion tester is suitable for testing the solubility of various products’ surface coating and the printing test of mobile phone keys under the load of 500g,200g,100g,50g,20g and 10g. The effect of the abrasion on the sample was determined by the rubbing of pencil, eraser and alcohol with a certain number of turns.
The abrasion testing machine has a variety of clamping and a variety of friction, so that your test accurate and effective. LCD digital display counter, can set arbitrary test times, intuitive actual test times. The taber abrasion tester has adjustable test speed, preset data shutdown function.

Test Station | Running Two Groups |
Test Speed | 5-60 times/min (knob adjustable,LCD display) |
Frequency Counter | 0~999999 Times (preset, power off memory) |
Friction Stroke | 0 ~ 50mm (Adjustable) |
Test Bar Jig | Can adjust up and down the required distance |
Machine Size | 550 × 400 × 310mm (L×W×H) |
Table Size (L×W) | 400 × 250mm|Machine Weight:30kg |
The abrasion tester machine for rubber wheel and plastics test has the function of adjustable test speed, times and stroke. The shell is made of stainless steel, the design of the whole machine is reasonable, the structure is tight, the operation is safe, stable and accurate. Abrasion-resistance tester has different friction head, meet different requirements, multi-function test.

Turn on the power switch.The workpiece to be tested is fixed on the work table and the friction part is kept vertical and the range is reasonable. | Method of Use |
According to the requirements of different states and different products, enter the required number of cycles of friction on the counter (0-99999 times), and press the RESET button to clear before setting the data. | |
According to the length range of different products to be tested, choose the corresponding friction distance.If you need to adjust the friction distance, first open the back cover, adjust the distance adjustment screw, you can adjust the distance. | |
If make alcohol friction test, can be in “round head” good special friction on the friction hammer with cloth dipped in alcohol friction. | |
For the rubber friction test, take the rubber strip 60mm long into the rubber friction fixture, and gently tighten the front screw, such as rubber friction, the friction head down, pull out a section of rubber can be used. | |
Turn on the work switch.In the normal operation process of the machine, if there is any abnormal situation, you can immediately turn the working switch or the power switch to the “OFF” button, at this time all the operation of the machine will stop.When restarted, the counter still records the current data, test continue. | |
After the operation of the selected friction times, the abrasion testing machine can be judged according to the results. |

To ensure the automatic uniform speed operation of the equipment, place the object under test in the center as far as possible. | Maintenance |
The maximum working load of the abrasion testing machine is ≤ 2Kg. | |
After normal use, Please use wd-40 silencing oil to maintain the operating shaft. | |
Normal operating ambient temperature: 40 ± 5℃, avoid to be placed the abrasion-resistance tester in dusty places. | |
The abrasion tester adopts 220V, 5A design, non-professional technicians are strictly prohibited to disassemble. | |
Do not put your hands, feet and hair on the left or right side of the machine to avoid unnecessary safety accidents. |
The machine adopts precision transmission parts of Japanese origin to drive, running smoothly and with low noise. The abrasion tester has three kinds of fixtures: 45 degree pencil hardness scratch test fixture, eraser test fixture, alcohol test fixture. Can be used for pencil’S hardness scratch test, eraser, alcohol wear test.
● The abrasion tester is made of stainless steel with good corrosion resistance|Test Round-trip Rate: 5 ~ 60 times /min continuously adjustable.
● Friction Frequency: No section type can adjust the speed frequency, and digital display speed. The abrasion tester byk quality is good, But there has many abrasion tester machine manufacturers in China.
● Abrasion Counter: It adopts 6 digit preset LCD display counter, with power failure memory function, automatically stop the machine after reaching the set number
● Friction Distance: 2-25mm can be adjusted freely. The test bar of abrasion tester for rubber wheels can be adjusted up and down the required distance
● The abrasion tester is made of stainless steel with good corrosion resistance|Test Round-trip Rate: 5 ~ 60 times /min continuously adjustable.
● Friction Frequency: No section type can adjust the speed frequency, and digital display speed. The abrasion tester byk quality is good, But there has many abrasion tester machine manufacturers in China.
● Abrasion Counter: It adopts 6 digit preset LCD display counter, with power failure memory function, automatically stop the machine after reaching the set number
● Friction Distance: 2-25mm can be adjusted freely. The test bar of abrasion tester for rubber wheels can be adjusted up and down the required distance