Here is a CT-160D Salt Spray Chamber we will do the shipment soon. Before packing this salt spray chamber, Let me take some photos and share with you. I hope you like it. The totally lenght 2240 mm, width 1255mm with 1350mm stack height. The Testing Standard According with GB/T2423.17|10125-1997, GB10587 |6460 |1771, ASTM-B117, GJB150, DIN50021-75, ISO3768 |3769 |3770
Salt Spray Chamber used for testing the corrosive resistance of products whose the surface was treated with paint, electroplating, inorganic and organic film, anode handling, anti-rust oil, etc. Wall-mount spray system can be freely placed without occupying any effective test space. With imported quartz nozzle, it has the characteristics of smooth interior wall, accurate angle and no crystalline in long-time spraying. Distinctive spring door hinge design makes the chamber door easy to open and close. The inner and external shell of the chamber is made from PVC materials.

| ● | Usable Chamber Volume: 800 Liters |
| ● | The Size Of The Working Chamber Is Not Less Than (WxDxH): 1600x500x1000 mm |
| ● | Spray Method: – Nozzles Not Subject to Crystallization|Compressed Air Supply (0.8-1.5 bar) |
| ● | Adjustable Mode (Continuous/Intermittent/Pprogrammable) |
| ● | Amount of Deposited Salt Mist: 0.5..2 ml / 80 cm^2 /hour |
| ● | Relative Humidity: 85±5% |
| ● | Operating Temperature Range (in the chamber): +35±2 ~ +50±2°C |
| ● | Salt Solution Temperature: +35±2 ~ +50±2°C |
| ● | PH Value: 6.5…7.2; 3.0…3.2 |
| ● | Dispersion of Salt Fog 95% Drops: 1..10 microns; Water Content, ml/h: Adjustable |
| ● | Test Methods: NSS (5% NaCl solution) / ASS (Acetic Acid Solution), CASS (Acetic Acid Solution With Copper Chloride) |
| ● | Brine Tank Volume: Plastic Tank 40 Liters |
| ● | Control Type: Programmable Logic Controller |
| ● | The Chamber Is Equipped With Pneumatic Cover Lifters; Chamber Weight (without salt): 180 KGS |
| ● | Power, Not More Than: 2.5 kW; Power Supply: 220±10% V, 50Hz, 1 PH |
| ● | Air and Water Filters, With Compressor for Chamber Operation |

CT-160D Salt Spray Chamber can simulate the marine climate and can be used to test the salt fog resistant performance of materials, products and their coatings. They can also be used to evaluate the quality of the coatings. The interior and exterior sides of the salt spray chamber are made of FRP glass fiber reinforced plastics, which is corrosion resistance, Anti-aging, high strength, P.P high temperature resistance also and easy to clean.
Three complete temperature control systems(Saturated air temperature, the temperature in the cabinet, and the test liquid temperature) ensure the consistency and standards of the test. Long-term operation will not be permeated out, water airtight structure, no salt spray overflow. Optional pneumatic rod, not a gas source close Cover effortless. And there are no leak from the baths around.

Use imported PP & PVC for solid mechanical structure, good resistance to hydrochloric acid, heat resistance and never aging, suitable for salt fog copper acetate, Corrosion resistant, shock resistant etc. Patent nozzle and conical diffusion device makes the fall fog rapidly and evenly. With manual level automatic control mode, the biggest setting time can reach 9990 hours. CT-160D salt spray chamber have automatic demist device, can clear observe tested products after the experience is finished. Meet international test standards.
| ● | The salt spray chamber molded by high temperature welding, corrosion resistance, easy to clean, no leakage phenomenon. |
| ● | Tower spray system, and equipped with salt water filtration system, no crystallization nozzle, salt spray evenly distributed, the amount of settlement free adjustment. |
| ● | The lid with transparent material can be clearly seen in the box test items and spray conditions. |
| ● | Between the lid and the box with water sealed structure, no salt overflow. |
| ● | Line control panels and other components are fixed in the easy inspection and maintenance of the location. |
| ● | Use the air cylinder open side door, not only beautiful, and easy maintenance. |

Advanced Salt Spray & Cyclic Corrosion Testing Systems
Accelerate your material durability assessments with Wewon’s flagship corrosion test chambers. Engineered to strictly comply with global standards such as ASTM B117, ISO 9227, and IEC 60068-2-52, our equipment provides court-defensible data for automotive, aerospace, and marine surface coatings. Whether your global facility (GEO) requires a standard continuous salt fog cabinet or a large-capacity walk-in cyclic corrosion room, explore our core testing solutions below to request immediate specifications and secure an accurate quotation.
ASTM B117
Standard Salt Spray Chamber
The industry-standard continuous salt fog environment. Features a transparent cover for real-time observation of component degradation and rust formation.
Lab Grade
Salt Spray Test Cabinet
A highly durable, laboratory-grade cabinet designed for uninterrupted salt mist exposure, ensuring perfectly repeatable surface coating validation.
Automotive
CT-160D Fog Chamber
Advanced precision equipment tailored for rigorous automotive testing. Delivers highly uniform salt fog distribution for Tier 1 component screening.
CCT Tech
Cyclic Corrosion Chamber
Programmable multi-environment system seamlessly alternating between salt spray, dry-off, and high-humidity cycles to replicate realistic outdoor conditions.
High Capacity
Walk-In Corrosion Chamber
Constructed with premium stainless steel internals, this large-scale walk-in room accommodates bulky industrial assemblies and solar panels for severe exposure testing.
Systemic
Corrosion Test Room System
Fully customized and integrated corrosion testing facilities designed for enterprise-level quality control, featuring advanced touch-screen climatic programming.