FPC Bending Test Machine|MIT Folding Endurance Tester

FPC bend test machines are designed to test the flexural strength and endurance of FCBs. The machine is capable of performing a reciprocating push-pull action with twists and turns, during which it evaluates the FCB’s ability to withstand bending and twisting without breaking or losing its electrical conductivity. The FPC bend test machine is equipped with adjustable speed, adjustable bending angle, automatic counting, and automatic shutdown when the set number of times is reached.

The importance of FPC bend test machines goes beyond mere durability testing. The test results provide critical data for manufacturers of FCBs to improve their product quality. Specifically, FPC bend test machines evaluate a variety of properties, including the flexural strength, ductility, uniformity, and resistance to mechanical stress. By producing reliable and reproducible data, the machine helps to ensure the quality of FCBs, protecting manufacturers’ reputation, and helping to prevent costly product recalls.

The FPC bend test machine works based on the principle of cyclic bending. It involves repetitively bending the flexible circuit board, simulating the conditions that the board will experience when incorporated into an electronic device. The machine applies a fixed force load to the FCB and then cycles through various bending angles to observe how the board reacts to different stresses. The FPC bend test machine is capable of testing FCBs up to a certain degree of flexibility, after which the board may break or lose electrical conductivity. The machine is adjustable, allowing users to set different bending angles, speed of cycling, and determine how many cycles occurs before the test stops.

FPC Bending Test Machine
Test Angle: ±180° Programmable Control Way: Touching Screen+PLC
Testing Speed: 10-120 Times/min Motor Type: Servo Motor
Test Stroke: 15-100 mm Bending R 0.38, 0.8, 1.2, 2
Machine Size: D450*W380*H700 mm Test Counter: 0~999999 Times
Max Width: 100 mm Machine Weight: 45 KGS
Test Load: 0 ~ 1000g Power Supply: AC220V, 50Hz, 1 Phase
The FPC bending life testing machine operates on a simple yet effective principle. The machine securely fixes one end of the FPC to the tension device located at the upper end of the bending machine, while the other end is attached to a rotary fixture at the lower end. The design allows the FPC to undergo repeated bending cycles while maintaining a fixed force value, thanks to the adjustable adjuster. This way, the Wewon’s FPC flexible testing machine can deliver accurate and consistent results, making it an invaluable tool for anyone involved in FPC production and testing.
The FPC bending test machine is driven by stepper motor, with high precision, accurate positioning, low noise, and can be used for a long time. Equipment Features
Reset the program-controlled origin, no need to set the fixture in place by hand; The FPC flexible testing machine adopts touch screen display controller as program input.
The test angle, speed, test times, and motor return to the origin can be set and counted automatically. When the product is bent and broken and cannot be energized, the operation can be stopped automatically.
JIS C 6471 Test Methods Of Copper-Clad Laminates For Flexible Printed Wiring Boards
JIS C 5016 Test Methods For Flexible Printed Wiring Boards
JIS P 8115 Paper and Board – Determination of Folding Endurance – MIT Method
TAPPI T 423PM Folding Endurance of Paper (Schopper Type Tester)
ASTM D2176 Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester
GB/T 2679.5-1995 Paper and Board–Determination of Folding Endurance (MIT tester)
Please enter your email, so we can follow up with you.

© Copyright 2014-2023. Wewon Environmental Chambers Co., Ltd.