Hinge Fatigue Testing Machine|Torque and Life Testing Machine for Hinges

Hinge fatigue testing machine uses Windows screens for test program settings. The machine is easy to operate and all test data can be stored (For example: test conditions, torque-angle curves, life curves, inspection reports, etc.) Hinge fatigue testing is a process used to assess the strength and durability of a hinge over time by measuring its fatigue levels. It involves subjecting the hinge to different cycles, loads, and combinations of loads in order to measure how much strain the hinge can handle before failure or stress-induced damage occurs. This provides valuable insight into the performance characteristics of any given hinge design.

Hinges are an essential component in many products, including doors, cabinets, and automobiles. To ensure the durability and reliability of hinges, they must undergo fatigue testing. The hinge fatigue testing machine is a specialized testing equipment designed to test the durability and performance of hinges used in various industries. The machine is used to simulate the repetitive opening and closing of a hinge, which is critical in determining its lifespan and reliability.

Torque and Life Testing Machine for Hinges
Equipment Model WEW-ST-3200-HFT WEW-ST-6300B-HFT
Control Method Mechanical + PLC Touching Screen + PLC
Max Test Rang 17” Laptop 17” Laptop
Test Cycle Times 1 ~ 999,999 Times 1 ~ 999,999 Times
Specimen Test Load 0.01~50kgf.cm 0.20~150kgf.cm
Loading Platform 386mm (L) x 528mm (W) 386mm (L) x 528mm (W)
Test Angle 5~180° 0~180°
Test Speed 0~200 rmp/min 0~250 rmp/min
Test Angle Minimum 0.5° 0.5°
Drive System Servo Motor (Japan) Servo Motor (Japan)
Equipment Dimension W850*D650*H780mm W850m*D680*H850m
Power Voltage 220V 50Hz 5.5A 220V 50Hz 8.0A
Equipment Weight 125 KGS 155 KGS
Hinge fatigue testing machine can print and save graphics (torque-angle curve, torque decay curve, inspection report) Equipment Features
The test data is stored on the tester’s computer (each data can be stored, unlimited times).
The test conditions are all set by the computer screen (including opening angle, speed, times, pause time…etc.)
The title of the inspection report can be modified at any time (Chinese and English). The inspection report can be transferred to Excel| and edited in real time.
Shaft torsion endurance Life testing machine can record each torque-angle curve.
When the machine is running, it can display the torque-angle curve and the torque decay curve at the same time.
The test position of Hinge on Notebook can be adjusted by itself. During testing, the engineer can choose to apply force on one side or two sides.
During testing, it’s important to measure many factors like external clamping force, displacement, travel torque, and hinge life cycles. By tracking the amount of load the sample experiences over time through these measurements, we can gain an understanding of its fatigue behavior during testing and make adjustments if necessary. Additionally, measuring these attributes often allow us to design related experiments that replicate real-world conditions for the components|Hinge Fatigue Testing → How it Works ?

Once the tests are finished and you’ve gathered all your results, it’s important to interpret what you learned. While fatigue testing produces an enormous amount of data, some programmable touch screen controllers are available to help make sense of the results. The programmable controllers makes it easier to keep track of important trends that might be occurring in your sample, such as increasing cycle numbers or constant travel torque. If necessary, this data can also be used to adjust the test configuration for further experiments – for example by incrementing or decrementing sample clamp force.
Please enter your email, so we can follow up with you.

© Copyright 2014-2023. Wewon Environmental Chambers Co., Ltd.