Nail penetration tester also named lithium ion battery nail penetration test machine. The nail penetration tester is suitable for all kinds of battery level simulation in the treatment of household waste, Nail penetration test used for needle-punching test of lithium primary battery and other primary batteries, and lithium-ion battery (used in mobile phones, laptops, cameras and other digital electronic products), nickel-hydrogen, nickel-cadmium and lead-acid batteries (used for electric tools, toys, electric bicycles and other products).
The test standard for lithium battery nail penetration tester such as IEC60086-4: 2000, UL1642: 2006, SN/T1414.1-2004, SN/T1414.3-2004, QC/T743-2006, GB8897.4-2002. Wewon Environmental Chambers Co., Ltd. is the battery safety testing equipment manufacturer. If you are looking for the nail penetration test chamber for performance testing of lithium ion battery, lithium batteries, please visit the related page to get more information there.
How to Use Nail Penetration Tester ? With φ3, 5, 8mm high-temperature steel needle, with 10mm/s ~ 40mm/s speed, from the direction of vertical to the battery plate through (steel needle stays in the battery). The safety performance of the battery shall be tested by nail penetration test. After the test, the battery shall not catch fire or explode. Battery nail penetration test machine also an indispensable testing equipment for battery manufacturers and research institutes.
|Model Number||Battery Nail Penetration Tester︱WEW-ZY-1040K|
|Test Room||W520 X D435 X H470 (mm)|
|Needle Dimensions||φ3, 5, 8mm, High Temp Resistant Steel｜Penetrating Force:10～500KG|
|Tip Distance||The flat height of the battery is 200mm|
|Puncture Speed||At the speed of 10 ~ 40mm/s (adjustable), penetrating through the battery from the direction perpendicular to the battery plate, stop (1min~6hour) and automatically pull out from the battery, easy to unload and easy to install.|
|External Dimension||W900 X D650 X H1720 (mm)|
|Control System||W550 X D550 X H1070 (mm)|
|Window Size||200 X 200mm (10mm thick double layer explosion-proof glass)|
|Exhaust Fan||Diameter 150mm (Exhaust fan is installed on the back of the box)|
|Ventilation Opening||There are two ventilation opening with diameter of 50mm on the left side of the box (it can also be used to measure voltage, etc.)|
|Bottom Unit||The bottom for nail penetration tester is equipped with four universal pulley, free movement.|
|Explosion-Proof||Prevent battery explosion from injuring people and things around|
|Lighting System||The top of the test room for nail penetration test machine is equipped with a light|
|Machine Weight||About 120 kg｜Total Power:0.5KW|
|Power Voltage||AC 220V/50Hz Single-phase two-wire + Protective ground wire|
|Cylinder Type||The large φ125 X 400mm and the small φ32 X 100 mm two|
|Pressure Setting||1.0Mpa(10.2 kgf/cm2)︱Nail Penetration Tester For Battery Nail Penetration & Safety Testing|
|●||The trachea for nail penetration tester for lithium ion battery is meters||Standard Accessories|
|●||High-temperature tungsten steel needle: 2 sets (φ3, 5, 8mm)|
|●||According to UN 38.3 standard, There has one needle chuck for nail penetration test machine for lithium battery.|
|●||One copy of operation manual will send to customer by email.|
|●||The permitted operating environment is 0 ~ 35℃. Performance guarantee environment 5 ~ 28℃|
|●||The space between the equipment and the walls and surrounding objects must be greater than or equal to 1500mm|
|●||It is suggested that the equipment should be placed by the window for discharging the smell produced during the test to the outside.|
|●||It is suggested that inflammable and explosive articles should not be placed around the nail penetration test chamber.|
|●||Battery nail penetration testing machine and related accessories should be maintained regularly.|
The structure of nail penetration tester from Wewon Environmental Chambers Co., Ltd. Internal material: stainless steel, machine appearance: cold rolled steel with powder coating. Pneumatic pressure drive, Strength shows: Pressure transducer, There 4 polyurethane movable universal wheels are installed at the bottom of the fuselage.
The door for Weon’s nail penetration tester: Single door, flat handle, a glass window. Steel Needle: Tungsten steel needle and stainless steel needle. Protective device: Up and down protection switch. We also accept any custom design from customer as well. Your coming inquiry will be aswered by our sales dept within 24 hours.
|●||Nail penetration tester for battery nail penetration & safety testing with touch screen integrated controller, pressure can be set.||Product Features|
|●||With its own lighting system, the material of the inner box is flame resistant material|
|●||The holding time and speed of puncture can be set, with higher precision, and the maximum acupuncture force value can be directly displayed.|
|●||The air outlet is provided (it is convenient for customers to discharge the smell generated in the battery test to the test room)|
|●||Double layer explosion-proof glass window, explosion-proof box, independent controller (easy to operate and safer to use).|