Steam Aging Tester

Steam aging tester is designed to meet military and commercial Hi-Rel specifications (MIL-STD 202, Method 208, and others) for artificial aging of all electronic components and circuit boards. This includes high density, discrete components, relays, transistors, capacitors, SMT, and axial components. These steam aging chamber applied for the testing of sealing property for multi-layer circuit board, IC sealing package, LCD screen, LED, semi-conductor, magnetic materials, NdFeB, rare earths and magnet iron, in which the resistance to pressure and air tightness for above mentioned products can be tested out.

Wewon’s steam aging tester is offered with several configuration options to ensure it meets the needs of each customer. The standard configuration offers a single steam aging test chamber for large components. The steam aging test chamber can be equipped with 3 individually timed, ESD protected drawers with a unique closure mechanism that reduces steam escapement during drawer removal. Both systems provide complete monitoring and control of steam or water temperature and feature automatic timing of the test duration.

Steam Aging Tester
Steam Aging Tester
Model Description WEW-YSA-3 WEW-YSA-4
Testing Room.W×H×D(mm) 100×540×260,3Sets 100×540×260,4Sets
External Dime.W×H×D(mm) 610×540×340 760×540×340
Temp.Range R.T+10°C ~ +98°C R.T+10°C ~ +98°C
Temp.Constancy ±0.3 °C ±0.3 °C
Heating Up (min) 45 Minutes 40 Minutes
Temp.Resolution ±0.1 °C ±0.1 °C
Material Insulation PU & Fiberglass wool PU & Fiberglass wool
Material Exterior SUS#304 SUS#304
Controller Unit Digital Controller S.S.R.With P.I.D
Safety Devices (Note) Overheating Pretector Overheating Pretector
Safety Devices (Note) Water Shortage Steam Outlet Hole
Power Source(K.W.) AC 1Ψ 220V, 50Hz AC 1Ψ 230V, 60Hz

Wewon’s steam aging tester is a versatile tool that is designed to meet the needs of each customer. It comes with several configuration options to ensure that it can be tailored to the specific requirements of any application. The standard configuration of the steam aging tester includes a single steam aging test chamber designed for testing large components.

The steam aging chamber can be fitted with three individually timed and ESD protected drawers that feature a unique closure mechanism, which reduces steam escapement when drawers are removed. The system also provides complete control and monitoring of steam or water temperature, and comes with automatic timing of the test duration. Wewon’s steam aging tester is a reliable and efficient tool for carrying out steam aging tests for various applications and industries.

Overall of the steam aging tester made of stainless steel SUS # 304HL, simple operation settings. Microcomputer digital LED control with time planning function , the maximum set 9,990 mins. Equipment Features
Parts, connectors, passive components , semiconductors oxidation test pin high temperature and humidity.
Metal pin soldering test accelerated aging test. Multiple overtemperature protection / water cut heating and other safety devices.
The touch- PID + SSR temperature controller, timer function while a time , set the 9990 maximum fractional unlimited.
adobe pdf logoUL 1690 Underwriters Laboratories lnc. International Standard for Safety Data-Processing Cable
adobe pdf logoJASO D611 Japanese Automobile Standard Automotive Parts – Unscreened Low-Voltage Cables
adobe pdf logoIEC 60245-1 Rubber Insulated Cables – Rated Voltages Up To And Including 450/750 V – Part 1: General Requirements
adobe pdf logoIEC 60320-1 Appliance Couplers for Househoid and Similar General Purposes- Part 1: General Requirements
adobe pdf logoUL62 Test Standard For Safety Flexible Cords and Cables, UL 62 Twentieth Edition, Dated July 6, 2018
adobe pdf logoJIS C 3005 Japanese Industrial Standard Test methods for Rubber or Plastic Insulated Wires and Cables
adobe pdf logoUL 310 Electrical Quick – Connect Terminals|UL-817 The Power Line Static Tensile Force Test Machine
adobe pdf logoUL Standard for safety for Safety for Toy Transformemers, UL 697 Sixth Edition, Dated October 13,2004
Operation steps of steam aging tester according to MIL-STD 202, Method 208. You can familiarize yourself with the specific methods and procedures from the following steps.
1. Prepare the test samples: Cut the test specimens from the material to be tested according to the required dimensions specified in the MIL-STD 202, Method 208. Clean the test specimens to remove any dirt or contaminants.
2. Place the test samples in the steam aging chamber: Open the steam aging chamber and place the test samples inside on the test fixtures. Make sure that the samples are positioned away from each other and are not touching the chamber walls.
3. Close the chamber: Ensure that the chamber is securely closed and sealed to prevent any steam from escaping during the test.
4. Set the test parameters: Input the test parameters into the steam aging tester, including the predetermined temperature, pressure, and duration of the test as specified in MIL-STD 202, Method 208. Steam Aging Test Chamber China Manufacturer
5. Start the aging cycle: Once the settings are confirmed, start the aging cycle of the samples inside the chamber.
6. Monitor the test: Continuously monitor the test to ensure that the temperature, humidity, and pressure inside the chamber remain constant throughout the testing period.
7. Remove the samples: After the test has completed, carefully remove the test samples from the aging chamber and allow them to cool down to room temperature.
8. Inspect the samples: Inspect the test specimens for any changes or physical degradation caused by the aging process.
9. Analyze the results: Based on the observed changes in the physical properties of the test samples, determine whether the material meets the required MIL-STD 202, Method 208 criteria.
adobe-pdf-logo Specification for Steam Aging Testers
adobe-pdf-logo Solderability Tests for Component Leads, Terminations, Terminals and Wires
adobe-pdf-logo Specification for Cell Phone Plug Wire Durability Test Machine
adobe-pdf-logo Specification for Microcomputer Desktop Electronic Tensile Testing Machine
adobe-pdf-logo Specification for Pneumatic Key Life Testing Machine
adobe-pdf-logo Specification for Mobile Phone Drop Testing Machine
adobe-pdf-logo Specification for Mobile Phone Barrel Drum Drop Test Machine
adobe-pdf-logo Specification for Electrostatic Discharge Generator for Cell Phone Test
adobe-pdf-logo MIL-STD-883E Department of Defense Test Method Standard – Microcircuits
Steam Aging Test Chamber China Manufacturer –
Please enter your email, so we can follow up with you.

© Copyright 2014-2023. Wewon Environmental Chambers Co., Ltd.