Connect the TEMI 2700 Controller with Your Computer Via Ethernet Port

Connecting the TEMI 2700 controller with your computer via an ethernet port is a straightforward process that involves verifying the TEMI 2700’s IP address, connecting the ethernet cable, configuring your computer’s network settings, and then connecting to the TEMI 2700 via a web browser. This connection enables greater control and management of your automated process, allowing you to remotely monitor and adjust settings with greater accuracy and ease.

By following the simple steps outlined above, you can quickly and easily connect your TEMI 2700 controller to your computer via an ethernet port. If we gave you a guidance to make you connect the TEMI 2700 controller with your computer, Then you can operation the programme from your computer directly, Do you like it ? Here is an youtube movie will teach you how to do the set up work for you, I mean contact the TEMI 2700 controller with computer via Ethernet port.

https://youtu.be/RIZL3OqmFfs

TEMI 2700

Connecting the TEMI 2700 controller with your computer via an ethernet port is a simple process that can enhance your control over your automated process. By connecting via ethernet, you can monitor and control your process remotely and with greater accuracy. In this article, we will go through the process of connecting your TEMI 2700 controller to your computer via ethernet port.

Connecting your TEMI 2700 controller to your computer via an ethernet port is a simple process that can enhance your control over your automated process. By connecting via ethernet, you can monitor and control your process remotely and with greater accuracy. Follow the above steps to connect TEMI 2700 controller with your computer via ethernet port.

Before connecting TEMI 2700 to your computer, you need to verify its IP address. To do this, follow these steps: Step 1: Verify TEMI 2700 IP Address
1. Press the MENU button on the TEMI 2700 controller.
2. Navigate to the “CONNECTIVITY” menu using the arrow keys and press ENTER.
3. Navigate to the “ETHERNET SETTINGS” menu using the arrow keys and press ENTER.
4. Take note of the current IP address of the TEMI 2700 controller.
Once you have verified the IP address of the TEMI 2700 controller, connect one end of the ethernet cable to the ethernet port on the back of the TEMI 2700 controller and connect the other end to your computer’s ethernet port. Step 2: Connect Ethernet Cable
Before connecting to the TEMI 2700, you need to configure the network settings of your computer to match the same subnet as the TEMI 2700 controller. This will ensure that both devices are on the same network and can communicate with each other. Step 3: Configure Network Settings on Your Computer
1. On your computer, go to “Control Panel”
2. Select “Network and Sharing Center”
3. Click on “Ethernet” and then “Properties”
4. Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”
5. In the “Properties” window, select “Use the following IP address”
6. Enter an IP address that is in the same subnet as the TEMI 2700 controller. For example, if the TEMI 2700 controller has the IP address 192.168.1.10, you could use the IP address 192.168.1.20 for your computer.
7. Enter the subnet mask as 255.255.255.0
8. Leave the default gateway and DNS settings blank.
9. Click “OK” to save the changes.
Once you have configured the network settings on your computer, you can connect to the TEMI 2700 controller. Step 4: Connect to TEMI 2700
1. Open a web browser on your computer.
2. Enter the IP address of the TEMI 2700 controller into the address bar and press Enter.
3. You may be prompted for a username and password. The default username is “admin” and the password is “password”.
4. Once you have successfully logged in, you can access the TEMI 2700 controller’s settings and control your automated process from your computer.
  ● Communication Software: Connect with Your Computer (Download and Install in Your Computer) https://www.wewontech.com/SIMS-User-Manual(Eng).pdf
  ● User Manual for SamwonTech TEMI 2700 Controller, Please Check The Real Photo Here. https://www.wewontech.com/Communication-Software.zip

The TEMI 2700 controller which comes from SAMWONTECH (Korea), It is world class controller for environmental test chambers. Not only TEMI 2700, There also has TEMI 2500, TEMI 1500, TEMI 880, TEMP 2700, TEMP 2500 …. This type controller most support English, Russian, Japan, Korea, Chinese Language. TEMI 2700 has a SD Card support, There also suppor the Ethernet port which can connect with your computer as well.

It’s quite convenience design for the operators which makes the engineer doing testing work in desk and no need move the envrionmental chambers area and doing the operation work. Below is an instruction in word which will teach you make the TEMI 2700 controller connect with your computer, Please review these instruction carefully and you will find that it’s so simple to finish this setting work by yourself. If there any questions or unclear, Please contact us via Skype or email to make us easier support you.

TEMI 2700 Software System

TEMI 2700 Ethernet Connection

TEMI 2700
Please enter your email, so we can follow up with you.

© Copyright 2014-2023. Wewon Environmental Chambers Co., Ltd.