Wewon Environmental Chambers Co., Ltd. has developed one unit 6000 litres vehicle automotive test chamber for China local customer. This 6000 litres vehicle automotive test chamber contains a 1200*2500*2000mm (W*D*H) test room which used for the motorcycles temperature and humidity test.
The machine’s external dimension: 1500*3800*2400mm (W*D*H), There has 4 units fan motors on the top side of vehicle & automotive test chamber with 300 mm height. This vehicle & automotive test chamber totally height is 2700 mm.
The temperature range for this 6000 litres vehicle & automotive test chamber: -55C + 85C, 30%–95% humidity features. The drive-in vehicle test chamber keeps a narrow and long shape design, Because we should consider the possibility of customer’s installation area. This is a custom design which according to the customer installation plant situation.
The Wewon vehicle automotive test chamber named drive-in vehicle test chamber as well. The engineer will store the car or motorcycle into the test room to check the motor vehicle or motorcycle parts heat and cold resistant performance. The main purpose for the vehicle automotive test chamber test: Record the test data for the automotive industry to improve the vehicle automotive product’s quality.
According to the customer’s real demands, Wewon Environmental Chambers Co., Ltd. can develop and produce drive-in vehicle test chamber with different specifications, especially for LED, battery, automotive electronics, semiconductor and other industries, and Wewon can provide users with small size vehicle automotive test chamber with strong technical performance.
|●||Temperature Range:-55℃～+85℃||Performance Parameters|
|●||Minimum Temperature Limit:-60℃|
|●||Heating Time:From -20 to + 100 ° С no more than 30 minutes|
|●||Cooling Time:From + 60 ℃ to – 20 ℃ less than 30 minutes.|
|●||Humidity Range :30% ~ 95%R.H|
|●||Humidity Fluctuation: ±2.5.0%R.H|
|●||Humidity Uniformity: ±3.0%R.H|
|●||Assembly structure of vehicle automotive test chamber :The drive-in vehicle test chamber of this structure is assembled by independent plates, which are interlocked and strengthened with bolts for strength, thus facilitating transportation and installation.||Structure Introduce|
|●||Overall welding structure:This structure has a wider temperature/humidity range and a faster rate of temperature change than a built-up test chamber.|
|●||Prepackaged standard adjustment module:These modules provide great flexibility to maintain a constant environment, such as low temperature or low humidity, or you can create a dynamic, controlled environment to test the product for multiple cycles of temperature and/or humidity changes.|
|●||Basic functions: vehicle automotive test chamber can be programmed through the controller to do the dynamic cycle of temperature and humidity, as well as heat preservation and moisture test.|
|●||Commonly used optional parts:Common optional parts for vehicle automotive test chamber from Wewon include split type refrigeration unit, slope plate, air cooling refrigeration system, dry air purging system, observation window, doors and test hole with special position and size requirement.|
|●||Low humidity system option:Can be extended to the dew point temperature below 5 ℃. Strict pre-delivery test the walk in chamber has undergone strict testing and reliability test before delivery.|
|●||Compressor: Imported semi-closed German BITZER, Bock Compressor||Refrigeration System|
|●||Refrigeration Mode: Overlapping refrigeration, R22 single stage refrigeration|
|●||Condensation Mode: Air Cooling/ Water Cooling|
|●||Refrigerant: R404A, R23 (Imported environmental protection type)|
|●||The whole system shall be tested for leakage collection under ventilation pressure for 48H.|
|●||Heating and cooling systems are completely independent|
|●||Inner screw type refrigerant copper tube.|
|●||Finned Slope Evaporator|
|●||Dry filter, refrigerant flow window, repair valve, oil separator, solenoid valve, liquid storage tank are imported original parts|
|●||Korean TEMI 1500 temperature and humidity controller, or Japanese OYO3000 controller system|
The reason why you need to buy the vehicle automotive test chamber from Wewon Environmental Chambers Co., Ltd. ? Here are some reason to make you know the difference and understand the Wewon’s drive-in vehicle test chamber easier.
1. The vehicle automotive test chamber from Wewon is produced according to the international standard, and certified by the national quality supervision department which the results are credible. The production process is operated according to the ISO9001:2015 quality management system, and the quality is reliable.
2. Wewon’s vehicle automotive test chamber adopts imported PU bayer raw material, imported South Korea color zinc steel plate; Some China local supplier they prefer to use the domestic PU raw material, domestic color zinc steel plate or even coated steel plate.
3.The inner surface of the platform plate of Wewon vehicle automotive test chamber, cold storage plate is 1.2mm galvanized steel plate; Some China local supplier choose the cheap storage plate which is 0.6-0.8mm galvanized steel plate.
4. The vehicle automotive test chamber from Wewon, cold storage plate adopts sealing tape, the gas tightness of the storage body is good.
5.The density of drive-in vehicle test chamber from Wewon Environmental Chambers Co., Ltd. test room plate is up to 40~45kg/m3, and the density of cheap test room plate is 30~35Kg/m3.
6. Wewon’s vehicle automotive test chamber customers can assemble by themselves according to the drawings, The drive-in vehicle test chamber from Chinese local suppliers must be installed by the factory, because the cold and heat storage plate is often out of position, the lock is not tight, the gap is big, the customer can’t install well by himself.