The sand and dust test chamber is designed to provide corresponding environmental simulation and accelerated test tests for scientific research, product development and quality inspection. It is be used to evaluate and determine the enclosure and sealing of electrical and electronic products and the protection (IP) rating of the enclosure of electrical equipment, and whether it can ensure the good working performance of the equipment and components and the current use after the dust test or during the test (Environmental durability of external lighting of road vehicles and light signal devices) test.
The sand and dust test chamber is mainly used for the tests of the IP5X and IP6X levels specified in the enclosure protection grade standard. The machine is suitable for dust and dust resistance tests of various auto parts. The test components include car lights and meters. , Electrical dust jackets, steering systems, door locks, etc., as well as testing the tightness of the product.
The sand and dust chamber can also be used in the sand and dust simulation test of low-voltage electrical appliances, motors, instruments, meters, electronics, lamps and other products, to evaluate the sealing performance of mobile phones, electrical products and other products in a dusty environment, automobiles, motorcycles, etc. The sealing performance of parts and seals in the use, storage and transportation of sand and dust environment. The sand and dust test chamber simulates the destructive nature of the natural wind and sand climate, and is suitable for testing the sealing performance of the product shell.
It is mainly used for the IP5X and IP6X tests specified in the shell protection level standard. The equipment has a vertical circulating airflow with dust loaded, and the dust used in the test can be recycled. The entire air duct is made of imported high-grade stainless steel. The bottom of the air duct is connected with the cone-shaped hopper interface, and the air inlet and outlet of the fan are directly connected to the air duct.
Technical Support Videos For Sand Dust Test Chamber 01
Environmental Chambers, Looking for Partner
Technical Support Videos For Sand Dust Test Chamber 02
Environmental Chambers, Looking for Partner
Technical Support Videos For Sand Dust Test Chamber 03
Environmental Chambers, Looking for Partner
Technical Support Videos For Sand Dust Test Chamber 04
Environmental Chambers, Looking for Partner
Technical Support Videos For Sand Dust Test Chamber 05
Environmental Chambers, Looking for Partner
Technical Support Videos For Sand Dust Test Chamber 06
Environmental Chambers, Looking for Partner
Technical Support Videos For Sand Dust Test Chamber 07
Environmental Chambers, Looking for Partner
Technical Support Videos For Sand Dust Test Chamber 08
Environmental Chambers, Looking for Partner
Connect the diffuser at the top of the working chamber to the working chamber body at an appropriate position to form an “O”-shaped closed vertical dust blowing circulation system, So that the airflow can flow smoothly and the dust can be dispersed evenly to the greatest extent. The machine adopts a single high-power low-noise centrifugal fan, and uses a frequency conversion speed regulator to adjust the wind speed according to the needs of the test.
The sand and dust test chamber simulate the sand and dust environment encountered during the production, transportation and storage of the product, so as to test the protective performance of the shell. Nowadays, the role of dust-proof test equipment in quality control is getting more and more attention, especially when some parts manufacturers provide related products to large automakers, They must meet relevant standard test requirements.
In the product design stage, the verification work is done according to various related standards, and the problems found through the dust-proof test equipment and other related tests are solved immediately, so that Wewon Tech can manufacture the ideal product for the customer.