Technical Support Videos For Thermal Stream System

Wewon’s thermal stream system suitable for the requirements of the professional electronics market defence, test & measurement, industrial, scientific & medical, environmental test. If you can’t find the prper thermal system you require please contact us for further information on our extensive range of off-the-shelf and bespoke products or for a quote. Transition Rates: -55°C to +125°C, <10 seconds| +125°C to -55°C, <10 seconds. The Wewon thermal control system keeps advanced and reasonable structure design, The manufacturing process conforms to the specification, with beautiful appearance and generous.

Thermal Stream System 01

Environmental Chambers, Looking for Partner

Thermal Stream System 02

Environmental Chambers, Looking for Partner

Thermal Stream System 03

Environmental Chambers, Looking for Partner

Thermal Stream System 04

Environmental Chambers, Looking for Partner

 

The Wewon thermal control system are suitable for all kinds of semiconductor chip, flash memory/EMMC, PCB circuit board, IC optical communication (such as transceiver, high and low temperature test, SFP optical module high and low temperature test, etc.) electronic industry, such as IC characteristics analysis, thermal shock test, temperature shock test, failure analysis and other reliability tests.

Working Principle of ATS 710 Thermal Control System and ATS-535 Thermal Control System: The output airflow cover of the thermal control system will be covered by the test product. This way will form a test room in a closed space. The high or low temperature airflow output by the ATS 710 thermal control system makes the surface temperature of the tested product change dramatically. Thus the corresponding high and low temperature impact test is completed.

Thermal Stream System 05

Environmental Chambers, Looking for Partner

Thermal Stream System 06

Environmental Chambers, Looking for Partner

Thermal Stream System 07

Environmental Chambers, Looking for Partner

Thermal Stream System 08

Environmental Chambers, Looking for Partner

 

ATS 710 thermal control system and ATS-535 thermal control system can be used for a number of components in a single IC plate or the overall IC template components. Isolate it for high and low temperature impact, and it does not affect the other peripheral devices. Compared with the traditional thermal shock chamber, the impact rate of temperature variation is faster.

There has two test mode for ATS 710 thermal control system and ATS-535 thermal control system: Air Mode, DUT Mode. Make your test with high temp to room temp to low temp|high temp to low temp|high temp to room temp|low temp to room temp and adaptive program as well.

Thermal Stream System 09

Environmental Chambers, Looking for Partner

Thermal Stream System 10

Environmental Chambers, Looking for Partner

Thermal Stream System 11

Environmental Chambers, Looking for Partner

Thermal Stream System 12

Environmental Chambers, Looking for Partner

© Copyright 2014-2018. Wewon Environmental Chambers Co., Ltd.