Wire Elongation Tester|Elongation Test Machine for Copper Cable and Wire

The wire elongation tester is used to test the elongation of copper wires, aluminum wires, aluminum magnesium alloy wires, iron wires, and other wires. The circuit for Wewon’s elongation test machine is adopted the integrated circuit and process control, which doesn’t need manual calculation, and automatically display the percentage of elongation; the elongation length adopted with the laser sensor technology, with high sensor precision, and the full-scale range error is ±0.3%.

Equipment ModelWEW-XT-52S
Diameter Range0.1 ~ 5.0 mm
Drawing Speed250 ~ 300mm/min
Sample Sampling Length250 mm
Specimen Diameterφ0.03-φ1.2mm
Extension Range0-150mm(60%)
Measurement Accuracy±1%
Machine size650*250*250mm
Extended Range0~100mm, 45%
Tensile Test Range5Kg,10Kg,20Kg,30Kg,50Kg
Display Accuracy±0.1%
Power VoltageAC220V, 50Hz, 1 Phase, 2A
Equipment WeightAbout 13KG

Wire Elongation Tester

Keep the wire elongation test machine’s surface clean, Then connect the AC22V power supply to the extension test stand. Then Pull the power switch to the ON position.Test Procedure
Pull the steering switch to the left. After stopping the motor, stop the test piece with a length of 250 mm into the left jig and then straighten it into the right jig.
Press the clear switch to clear it, pull the direction switch to the right, the motor will slowly perform a tensile test, and the counter will count as a percentage of the frequency.
After the test product is broken after being stretched for a certain length, the motor will automatically stop, the counter will also stop counting, and the test value of the saved test value will end. The LED display value is the stretch length of the product.
The wire elongation tester for the accuracy of the test, additional with a scale, in the test. after the end, the scale value corresponding to the indicator can be compared with the displayed value. To ensure the error of the test results.
After the test is completed, turn off the power switch and unplug the power cord.

The surface of Wewon’s wire elongation tester is treated with electrostatic baking paint. The whole machine is designed reasonably, and the structure is secure, stable and accurate.Equipment Features
The circuit adopts advanced software programming and precise electronic sensing technology to measure the tensile of the specimen.
Length, automatically converted to % and automatically LED to display the percentage of the test’s elongation percentage.
Adopt the mechanical transmission system composed of high efficiency inner circulating screw and constant speed motor, and the machine runs smoothly. Precise, noiseless.
The fixture adopts advanced anti-skid handling technology to avoid fracture of the specimen in the fixture and improve the test.
The clamping device is fitted with a fixed screw, and the test piece can be fixed on the fixture while the test piece can be fixed on both ends of the test piece.
The fixed screws around the clamping device can prevent the specimen from falling into the machine after breaking and producing the machine.
LED digital percentage indicator and pointer indicating elongation scale display elongation percentage, no need for human.
The calculation results show that the two results have the correct function, and the accuracy of the test is obtained.
The electric wood insulation board is the working face, which makes the test more convenient and accurate. Optional digital display/pointer push pull gauge test specimen pulling force value, multi-function test.

© Copyright 2014-2018. Wewon Environmental Chambers Co., Ltd.